JBL PRX715XLF 1500W Extended Low Frequency Self-Powered Subwoofer (15″) SKU: # PRX715XLF MFR: # PRX715XLF
JBL PRX715XLF
Delivery in 1 week

Product Highlights

- 37 to 113 Hz - 131 dB peak SPL - 15" Low-Distortion, Low-Frequency Woofer - Class-D Amplifier - DSP for Crossover, Limiting, EQ - Integrated Stereo Pass-Thru - Integrated High Pass Filter - Combo Balanced XLR and 1/4" Inputs - Pole Receptacles for Speaker Poles - Integrated Handles

Price : RM 8,362.26 0% GST

You Pay : RM 8,362.26 0% GST

Delivery in 1 week

The 15″ JBL PRX715XLF 1500W Extended Low Frequency Self-Powered Subwooferis designed for sub bass sound reinforcement such as for concerts, DJs, and houses of worship, among others. The subwoofer is built from poplar plywood with an obsidian DuraFlex finish using tongue and groove joinery for stronger bracing and less box vibration. It utilizes a 15″ 2275H low-distortion, low-frequency dual voice-coil and magnetic gap woofer to achieve a peak SPL of 131 dB and a frequency response of 37 to 113 Hz.

For easy transport and setup, the subwoofer includes two injection molded handles, 16-guage steel dent resistant cloth backed grills, and an integrated speaker pole socket for SS4-BK or SS4-BK24 speaker poles.

The back panel of the speaker features two combination 3-pin XLR and 1/4″ balanced inputs and a High Pass/Full Range pass thru button. A gain control knob allow you to adjust the input signal on channels 1 and 2, and a pair of 3-pin XLR male thru connections enable passing audio to another subwoofer, powered speaker, or amplifier. The device includes a polarity button for inverting the subwoofer’s phase and a button for turning on and off the power/standby LED on the front of the unit.

The speaker’s crossover, dynamic limiting, component optimization, and selectable EQ boost is handled by a dbx type IV circuit. The subwoofer can be used by itself to reinforce the low end of a PA speaker system or in multiple subwoofer setups for increased crowd coverage.

Active or PassiveActive
Frequency Response-10 dB: 37 to 113 Hz
±3 dB: 44 to 91 Hz
CrossoverInternal: 90 Hz DSP controlled 48 dB filter slope
Loop out: 120 Hz analog 24 dB filter slope
Maximum Sound Pressure Level (SPL)131 dB
Signal IndicatorLimit: yellow LED indicates peak output and active DSP limiting
Signal: green LED indicates signal presence
Power/standby: blue LED indicates powered
Power/standby: red LED indicates power saving mode
AmplifierClass D
Power Capacity1500 W
Input Impedance20,000Ω (balanced)
PolarityNormal or reverse polarity
Low Frequency Driver1 x 15″ JBL 2275H low-distortion, low-frequency woofer with double voice coil and magnetic gap
Output ConnectorsDynamic control: dbx type IV limiter circuit
Enclosure MaterialRectangular 18 and 25 mm poplar plywood with obsidian DuraFlex finish
Input Connections2 x combo balanced 3-pin XLR female and 1/4″ inputs
Output Connections2 x balanced 3-pin XLR male thru outputs
Mounting1 x pole socket for SS4-BK or SS4-BK24 speaker poles
Transport and Storage2 x integrated handles with injection molded backing cups
Dimensions21.54 x 17.52 x 22.48″ (547.10 x 445.00 x 580.00 mm)
Weight56.0 lb (25.4 kg)
Packaging Info
Package Weight71.5 lb
Box Dimensions (LxWxH)27.0 x 25.0 x 22.5″

Reviews

There are no reviews yet.

Be the first to review “JBL PRX715XLF 1500W Extended Low Frequency Self-Powered Subwoofer (15″)”